Support
- Total activity 1301
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1068
Activity overview
Latest activity by Support-
Support created an article,
What is the warranty for my BOSTITCH tool?
One Year Limited Warranty BOSTITCH warrants to the original end-user purchaser that BOSTITCH products stating they come with a one year limited warranty will be free from defects in material and...
-
Support created an article,
Where can I buy BOSTITCH tools?
You may review a list of online BOSTITCH dealers or search for a dealer located near you by using our Retailer Locator. If your dealer is not stocking a particular product please ask your dealer to...
-
Support created an article,
How do I know if I have a Fixed Exhaust or a Multi-Directional Exhaust tool?
The "Fixed Exhaust" can be identified by stationary holes on the front of the cap on the top of the tool. The "Multi-Directional Exhaust" tools will have a rotating disc on the top of the cap, so t...
-
Support created an article,
My pneumatic nailer / stapler will no longer drive the fastener completely; it seems to be losing power. Can this be repaired?
Most of the time, the tool simply needs a tune up. A tune up would consist of a cleaning and fresh lube applied, along with the installation of the appropriate o-ring kit and trigger valve assembly...
-
Support created an article,
What nails will fit an N80S or N80SB nailer?
The N80SB was an updated version of the original N80S, however both models are no longer being manufactured. Our current 28 degree wire weld nailer is the F28WW. If you own an N80S, this nailer onl...
-
Support created an article,
Your instruction manuals refer to PSI and CFM. What's the difference?
PSI = Pounds Per Square Inch and is a measurement of pressure. CFM = Cubic Feet per Minute and is a measurement of volume.
-
Support created an article,
How do I know what size air fitting or hose I need for my tool?
At Bostitch, we usually recommend 3/8" for most applications to guarantee proper air flow to the tools. Lighter airlines can restrict air flow to the tool. Larger tools that are more likely to be u...
-
Support created an article,
What does the term "Low Fastener Lockout" mean?
Many of the Bostitch finish tools now feature a Low Fastener Lockout. This is a mechanism that will lock out the trip actuation system so that the tool will not cycle when it is almost out of faste...
-
Support created an article,
Quels sont les numéros de produit des batteries et des chargeurs pour les outils sans fil de Bostitch?
Voir ci-dessous pour les batteries et chargeurs des cloueuses à charpente sans fil et de finition Bostitch :Numéro de pièce :9B12070R Batterie Li-ion 3,6 V9B12071R Chargeur 3,6 V pour outils de fin...
-
Support created an article,
What are the product numbers for the batteries and chargers for the Bostitch cordless tools?
Please see below for batteries and chargers for the Bostitch cordless framing and finishing nailers: Part number: 9B12070R 3.6V Li-Ion Battery 9B12071R 3.6V Charger Fit- 3.6V Cordless Finish tools;...