
Support
- Total activity 1311
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1074
Articles
Recent activity by Support-
Spec Sheet C6R99BDSS + C8R99BDSS nails
Please click the attachment below to view.
-
PREMOIL-4OZ + PREMOIL-20OZ MSDS
This is used for both the 4 oz and the 20oz.
-
How do I know if I have a Fixed Exhaust or a Multi-Directional Exhaust tool?
The "Fixed Exhaust" can be identified by stationary holes on the front of the cap on the top of the tool. The "Multi-Directional Exhaust" tools will have a rotating disc on the top of the cap, so t...
-
My pneumatic nailer / stapler will no longer drive the fastener completely; it seems to be losing power. Can this be repaired?
Most of the time, the tool simply needs a tune up. A tune up would consist of a cleaning and fresh lube applied, along with the installation of the appropriate o-ring kit and trigger valve assembly...
-
What nails will fit an N80S or N80SB nailer?
The N80SB was an updated version of the original N80S, however both models are no longer being manufactured. Our current 28 degree wire weld nailer is the F28WW. If you own an N80S, this nailer onl...
-
Your instruction manuals refer to PSI and CFM. What's the difference?
PSI = Pounds Per Square Inch and is a measurement of pressure. CFM = Cubic Feet per Minute and is a measurement of volume.
-
How do I know what size air fitting or hose I need for my tool?
At Bostitch, we usually recommend 3/8" for most applications to guarantee proper air flow to the tools. Lighter airlines can restrict air flow to the tool. Larger tools that are more likely to be u...
-
What does the term "Low Fastener Lockout" mean?
Many of the Bostitch finish tools now feature a Low Fastener Lockout. This is a mechanism that will lock out the trip actuation system so that the tool will not cycle when it is almost out of faste...
-
Quels sont les numéros de produit des batteries et des chargeurs pour les outils sans fil de Bostitch?
Voir ci-dessous pour les batteries et chargeurs des cloueuses à charpente sans fil et de finition Bostitch :Numéro de pièce :9B12070R Batterie Li-ion 3,6 V9B12071R Chargeur 3,6 V pour outils de fin...
-
What are the product numbers for the batteries and chargers for the Bostitch cordless tools?
Please see below for batteries and chargers for the Bostitch cordless framing and finishing nailers: Part number: 9B12070R 3.6V Li-Ion Battery 9B12071R 3.6V Charger Fit- 3.6V Cordless Finish tools;...